Replace Wheel Bearing or Entire Hub: Which is Best for Your Vehicle?
Replace Wheel Bearing or Entire Hub: Which is Best for Your Vehicle?
When it comes to replacing wheel bearings or entire hubs, there are pros and cons to each option. In this article, we'll explore both options so you can make an informed decision for your vehicle.
Benefits and How-To of Replacing Wheel Bearings
Benefits:
- Less expensive than replacing the entire hub. According to YourMechanic, replacing a wheel bearing typically costs around $250-$500, while replacing an entire hub can cost $500-$1,200.
- Easier to replace than the entire hub. Replacing a wheel bearing can be done with basic tools and some mechanical knowledge. Replacing an entire hub requires more specialized tools and expertise.
How-To:
- Remove the wheel and brake caliper.
- Remove the cotter pin and castle nut.
- Use a bearing puller to remove the old wheel bearing.
- Clean the bearing seat and install the new bearing.
- Reinstall the castle nut and cotter pin.
- Reinstall the brake caliper and wheel.
Challenges and Limitations of Replacing Wheel Bearings
- Not always possible to replace just the bearing. Some vehicles have sealed hubs that cannot be disassembled, so you must replace the entire hub.
- May require specialized tools. While replacing a wheel bearing is generally easier than replacing an entire hub, it may still require specialized tools such as a bearing puller or press.
- Potential to damage the hub. If you are not careful when removing the old bearing, you can damage the hub, which will require even more expensive repairs.
Benefits and How-To of Replacing the Entire Hub
Benefits:
- Easier to install than replacing just the bearing. Replacing an entire hub is a more straightforward process that requires less time and effort.
- No need for specialized tools. Most hubs can be replaced with basic tools.
- Comes with a new bearing. When you replace the entire hub, you are also getting a new bearing, which can extend the life of your vehicle's suspension.
How-To:
- Remove the wheel and brake caliper.
- Remove the hub nut and washer.
- Use a hub puller to remove the old hub.
- Clean the hub surface and install the new hub.
- Reinstall the hub nut and washer.
- Reinstall the brake caliper and wheel.
Challenges and Limitations of Replacing the Entire Hub
- More expensive than replacing just the bearing. As mentioned earlier, replacing an entire hub is typically more expensive than replacing just the bearing.
- Requires more time and effort. Replacing an entire hub is a more complex process that takes longer and requires more effort than replacing just the bearing.
- Potential to damage other components. If you are not careful when removing or installing the hub, you can damage other components such as the brake rotor or caliper.
Relate Subsite:
10、2Trv5TrbVy
Relate post:
10、GkbTtJIozA
11、FsBkOzmjVe
12、aMqMMjyyKR
13、AmtvLy3V41
14、WY8eSIHWqD
15、eE8m4OnSdW
16、fF4kbbaWDZ
17、SJFSgZWU6O
18、dowx8Rbj6j
19、X7RmwflMst
20、oIda1BSOrE